The EM78F561N is an 8-bit microprocessor designed and developed with low-power, high-speed CMOS technology and high noise immunity. It has an on-chip 1K13-bit Electrical Flash Memory. It provides three protection bits to prevent intrusion of user's Flash memory code. Twelve Code option bits are also available to meet user's requirements. With its enhanced Flash-ROM features, the EM78F561N provides a convenient way of developing and verifying user's programs. Moreover, this Flash-ROM device offers the advantages of easy and effective program updates, using development and programming tools. Users can avail of the ELAN Writer to easily program their development codes.
- 1K13 bits on-chip Flash memory
- 488 bits on-chip registers (SRAM)
- 8-level stacks for subroutine nesting
- 3 programmable Level Voltage Reset LVR : 4.0V, 3.5V, 2.7V
- Less than 1.5 mA at 5V / 4 MHz
- Typically 20 A, at 3V / 32kHz
- Typically 1.5 A, during sleep mode
- 3 bidirectional I/O ports: P5, P6 and P8
- 14 I/O pins
- Wake-up port : P6
- High sink port : P6
- 6 programmable pull-high I/O pins
- 5 programmable pull-down I/O pins
- 6 programmable open-drain I/O pins
- External interrupt with Wake-up : P60
- 2.4V~5.5V at -40C~85C (Industrial)
- 2.2V~5.5V at 0C~70C (Commercial)
- Operating frequency range (base on two clocks)
- Crystal mode : DC~16MHz @ 4.5V~5.5V ;
DC~8MHz @ 3V~5.5V ;
DC~4MHz @ 2.2V~5.5V
- ERC mode : DC~16MHz @ 4.5V~5.5V ;
DC~8MHz @ 3V~5.5V ;
DC~4MHz @ 2.2V~5.5V
- IRC mode : DC~16MHz @ 4.5V~5.5V ;
DC~4MHz @ 2.2V~5.5V
Internal RC
Frequency |
Drift Rate |
Temperature
(-40C~85C) |
Voltage
(2.4V~5.5V) |
Process |
Total |
4 MHz |
3% |
5% |
2.5% |
10.5% |
16 MHz |
3% |
5% |
2.5% |
10.5% |
8 MHz |
3% |
5% |
2.5% |
10.5% |
- Internal interrupt : 3
- External interrupt : 3
- 6 channels Analog-to-Digital Converter with 10-bit resolution
- One set of comparator Offset voltage: smaller than 5 mV
- One 8-bit Timer/Counter
- TC3 : Timer/Counter/PDO (programmable divider output)/PWM (pulse width modulation)
- 8-bit real time clock only (TCC) with overflow interrupt
- External interrupt input pin
- 2/4/8/16 clocks per instruction cycle selected by code option
- Power down (Sleep) mode
- High EFT immunity
- Single instruction cycle commands
- Special Features
- Programmable free running Watchdog Timer
- Power-on voltage detector available (2.0V ~ 2.1V)
- 10-pin MSOP 118mil : EM78F561NMS10J/S
- 16-pin DIP 300mil : EM78F561NAD16J/S
- 16-pin SOP 150mil : EM78F561NASO16AJ/S
Note: Green products do not contain hazardous substances. |